Thinking about the Solar Roofing question for a home in Monroeville Pennsylvania?

Understand how panels, tiles and roofing fit into a single plan

Call 412-858-8858 before you commit to a layout

Reading the Roof Before Anything Is Mounted: What Gets Checked First

A solar array sits on a roof for a very long time, so the roof has to be sound from the start; cracked shingles, soft decking and failing flashing are easier to fix with the surface open. Roofs with several layers of old shingles are checked for weight and flat surfaces; a house that has been added onto may have a mix of framing types.

The flashing where the roof meets a chimney or a wall is checked for rust, gaps and old patching; a short written summary of the condition keeps the owner informed. The history of the roof helps as much as the walk does; the owner's knowledge of the house fills gaps no inspection can reach.

Every panel is only as dry as the roofing beneath it; the planning for Solar Roofing starts with the roof for that reason. Shingle life and panel life are rarely the same; a worn roof under new panels is a mismatch that grows more costly with time.

Orientation, Pitch and Trees: Reading the Site

The direction and tilt of each slope decide how well a solar array can perform; a roof shaded by tall trees or a neighboring hill loses output through the day. The Pittsburgh area has plenty of gray days, so honest expectations matter; trees that were small at planting have grown past the roofline.

The roof in Monroeville Pennsylvania is read slope by slope for Solar Roofing; a slope with plenty of sun but a poor condition is a problem to solve first.

Complex rooflines still carry a system, but the layout takes more thought; valleys and ridges set limits on where rails run. Shade from the landscape belongs in the plan; the neighbors' trees and buildings count as well as the owner's.

A plan that looks at the whole year gives a more honest picture; the seasons change which slope works hardest.

Mounted Modules and Integrated Roofing: What Each One Asks of the Roof

Solar roofing products are laid in rows like conventional materials, with wiring running beneath; a rack system leaves the existing roofing in place and adds a layer above it. Solar tile installation follows the same layout discipline as laying clay or concrete tile; the roofing details at edges, valleys and penetrations still follow roofing rules.

Neighbors and homeowner associations may care about how the system looks from the street; flush products take more careful flashing at every edge.

Others are large flat modules that sit on the roof like glass panels; a roof that matches the architecture of the house looks right from the street. Laying solar tile borrows habits from traditional tile work; replacement tiles are set aside so a damaged one can be swapped later.

Every Hole in the Roof Is a Promise to Keep Dry: Getting the Layers Right

Rack systems are held to the roof by mounts that go through the shingles and into the framing; the mount is set into sealed layers so water flows around it and not under it. Slate and clay call for special brackets that grip without cracking the material; a bracket made for one roof can damage another.

Preparation under the mounts is as careful as the work above them; a wet roof and a drill do not belong together, so the schedule follows the weather.

Metal flashing lasts longer than a bead of sealant alone; the right bracket for a slate roof is not the right bracket for shingles.

Panels act like sails on a gusty day, so mounts are spaced and fastened for uplift; a roof that is sound under the array resists wind far better than a tired one. Rain and meltwater find the gaps between panels and run down the shingles below; clean gutters protect the fascia and the siding below.

Snow Load and Shedding: Planning for Winter

Snow guards or placement choices can keep snow from sliding onto walkways, doors and gutters; the area below the array deserves as much thought as the array itself. Edges and eaves need the same protection they have always needed; clearing debris from the gutters before winter prevents backups.

Snow load is part of the structure's design, so the framing has to carry it; snow guards at the bottom edge keep slides slow and controlled.

Fixing air leaks in the ceiling below is part of a complete plan; the outcome is a roof that sheds snow slowly and safely.

Conduit, Junctions and Coordination: Dividing the Work

Electricians handle the wiring, the inverter and the connection to the house; clear communication between the trades prevents holes in the wrong place. The two crews work in a sequence, and each depends on the other; panels cannot go on until the mounts are flashed and the roofing is complete.

The electrician and the roofer agree on where the opening goes before either one drills; a poorly sealed wire entry is a slow leak that nobody sees.

A short joint walk with both trades settles most questions before work begins; a quick call between the trades saves a day of waiting.

Work Order Makes or Breaks the Job: Detach and Reset

When both projects are needed, the roofing comes first and the solar array follows; the two projects share staging, scaffolding and access. Detaching and resetting panels takes planning, since the wiring and mounts must be handled safely; the first inspection of the roof decides how smooth the later steps go.

A new roof gives an array a long, quiet future; a single schedule keeps everyone moving in the right order.

The roof under panels is looked at regularly like any other; a loose bracket or a lifted flashing is caught early with a regular look.

A roof done in spring or fall leaves the summer sun for the array; the array goes on a fresh surface and the owner gets both results in one calendar year.

Care for a Roof Under Panels: Small Habits, Long Life

Keep a photo of the roof from each side so changes are easy to spot over time; shingles around the array edge deserve a look because wind lifts them first. Leaves, twigs and dirt build up along the lower edge of a panel and trap moisture; the owner can ask the roofer how often a check makes sense for the house.

Ready to Talk About Solar and Your Roof: Describe the House

Questions about the roof under a future array are welcome at The Roofing Company; contact us at 412-858-8858 to start the conversation. Describe the house, the roof and your questions, and a roofer will take it from there; a roof that is ready for solar makes the rest of the project simpler.

 

Charles Kotulsky

Verified

★★★★★
We used John and The Roofing Company to replace our roof before the summer. They showed us the Atlas shingles and we went with the hearthstone color. They removed the old roof and put the new one on all in one day which was great. We love how it looks and will be calling them for siding next year

michael Zawodni

Verified

★★★★★
Put a roof over our deck, very professional, kept jobsite clean everyday, and went above and beyond with quality and craftsmanship. Couldn't recommend this company more!! Best around.

Chris Juricich

Verified

★★★★★
The price was right, and most importantly our new roof looks beautiful. It was also delivered on-time and with great communication throughout.

Mark Lehner

Verified

★★★★★
The Roofing Company LLC is hands down the most knowledgeable and professional contractor I’ve worked with. Their team is incredibly attentive, responsive, and reliable—from the first call to the final inspection. What truly sets them apart is their deep understanding of not just roofing, but the entire construction industry. John is a true professional with years of hands-on experience and insight. His knowledge goes far beyond shingles and gutters—he understands this industry from the ground up, and it shows in every detail of the job. If you’re looking for a contractor who delivers quality, communicates clearly, and stands behind their work, look no further. The Roofing Company LLC is the real deal.

Michael Long

Verified

★★★★★
Attention to detail was great , very professional company