Solar Roofing

Thinking about your Solar Roof Installation near Monroeville Pennsylvania?

Learn whether your roof is ready to carry solar

Reach us at 412-858-8858 to set up a roof walk

Solar Is Only as Good as the Roof Beneath It: Why the Roof Matters Most

The surface under an array is hard to reach once the array is in place; the decision between repair and replacement is made first, before layouts are drawn. Older houses with plank decking or thin rafters call for a closer look; snow on an array adds to the load across the whole slope.

The flashing where the roof meets a chimney or a wall is checked for rust, gaps and old patching; a short written summary of the condition keeps the owner informed. The history of the roof helps as much as the walk does; patterns of old trouble point to a detail that needs correcting.

Every panel is only as dry as the roofing beneath it; each decision about the layout rests on what the roof can carry. Solar equipment is built to last for a very long time; the age of the roof is the first fact on the planning sheet.

Orientation, Pitch and Trees: Shade From Trees and Hills

A roof facing south, east or west tends to see more useful sun than one facing north; a roof shaded by tall trees or a neighboring hill loses output through the day. Anyone planning Solar Roof Installation should ask how shade, cloud cover and the angle of the roof are being weighed; the plan should explain the assumptions behind any expected output.

A solar array that looks right on a drawing has to work on a real roof; the layout leaves clear space around vents, skylights and roof edges.

A roof's outline decides where panels can go; clear paths between sections allow for service and cleaning. A hillside to the south can shade a roof for a good part of the winter day; the plan accounts for shade that grows over the seasons.

Winter shows the true value of a good site plan; the seasons change which slope works hardest.

Panels on Top or Tiles in the Roofline: How the Styles Differ

Solar roofing products are laid in rows like conventional materials, with wiring running beneath; the choice of system shapes how the roof is built and how it looks from the street. Electrical connections under the tiles need protection from water and from pests; the crew works from the eaves upward so each row overlaps the one below.

Neighbors and homeowner associations may care about how the system looks from the street; rack-mounted panels are simpler to service because the roofing stays below them.

The market offers more than one way to build a solar roof; compare how each product is attached and how it drains. Tile-style solar work follows roofing habits; edges, ridges and valleys still follow the rules of good roofing.

Where Hardware Meets Roofing: Getting the Layers Right

Mounts for a rack system pass through the roofing and anchor in the framing; ice and snow press against every bracket through the winter. Different shingles, slates and metals take different kinds of mounts; mixing the wrong hardware with the wrong roofing causes cracks and slow leaks.

Sealant is applied under the flashing and over the fasteners, not as a patch afterward; water flows down the slope and has to be sent around every post and bracket.

Metal flashing lasts longer than a bead of sealant alone; photographs of each flashing detail go into the job file.

Panels act like sails on a gusty day, so mounts are spaced and fastened for uplift; every rail is attached at the spacing the hardware calls for. Rain and meltwater find the gaps between panels and run down the shingles below; a downspout that handles a modest roof may struggle with a larger flow.

Cold-Season Realities: Slopes, Guards and Gutters

Anyone planning Solar Roof Installation should ask how the array will handle a heavy snowfall; the plan for a long, steep roof differs from the plan for a low shed. Gutters near an array need extra attention in cold weather; the roofer looks at the whole system, not only the part covered by panels.

Gutters and downspouts below an array carry more melt than the same roof would deliver without panels; snow guards at the bottom edge keep slides slow and controlled.

Fixing air leaks in the ceiling below is part of a complete plan; an array shades part of the roof and makes melting uneven.

Conduit, Junctions and Coordination: A Handoff Between Trades

Roofers handle the roof surface, the flashing and the mounting hardware; wiring that passes through the roof needs flashing just like a vent pipe. Good coordination saves repeated trips and delays; the roof is sealed before the wiring is run, not after.

The electrician and the roofer agree on where the opening goes before either one drills; a poorly sealed wire entry is a slow leak that nobody sees.

Planning the wire path is part of planning the roof; the route avoids rafters, vents and spots where water collects.

Work Order Makes or Breaks the Job: Timing the Two Projects

The simplest plan is to finish roof repairs before panels go on; planning both projects together uses the weather windows well. A leak under a panel or a failing section of roofing means the array has to be lifted off; the electrical side must be shut down before anyone touches the panels.

The right order of work keeps the roof and the array both in good shape; a single schedule keeps everyone moving in the right order.

The roof under panels is looked at regularly like any other; a short checklist after the first winter confirms that everything held.

Doing the roof first often means a single mobilization for the crew; a second tear-off to fix an avoidable leak is a frustrating experience.

Watching the Roof Over the Years: Small Habits, Long Life

Walk the yard after a big storm and look over the roofline and the edges of the array; a loose bracket or a shifted rail is easier to fix when caught early. Leaves, twigs and dirt build up along the lower edge of a panel and trap moisture; the owner can ask the roofer how often a check makes sense for the house.

Start With a Conversation About Your Roof: Bring Your Concerns

The Roofing Company welcomes questions about timing a reroof around a solar project; reach out at 412-858-8858 and describe the roof. Describe the house, the roof and your questions, and a roofer will take it from there; every roof is different, and a short talk beats guessing.

Charles Kotulsky

Verified

★★★★★
We used John and The Roofing Company to replace our roof before the summer. They showed us the Atlas shingles and we went with the hearthstone color. They removed the old roof and put the new one on all in one day which was great. We love how it looks and will be calling them for siding next year

michael Zawodni

Verified

★★★★★
Put a roof over our deck, very professional, kept jobsite clean everyday, and went above and beyond with quality and craftsmanship. Couldn't recommend this company more!! Best around.

Chris Juricich

Verified

★★★★★
The price was right, and most importantly our new roof looks beautiful. It was also delivered on-time and with great communication throughout.

Mark Lehner

Verified

★★★★★
The Roofing Company LLC is hands down the most knowledgeable and professional contractor I’ve worked with. Their team is incredibly attentive, responsive, and reliable—from the first call to the final inspection. What truly sets them apart is their deep understanding of not just roofing, but the entire construction industry. John is a true professional with years of hands-on experience and insight. His knowledge goes far beyond shingles and gutters—he understands this industry from the ground up, and it shows in every detail of the job. If you’re looking for a contractor who delivers quality, communicates clearly, and stands behind their work, look no further. The Roofing Company LLC is the real deal.

Michael Long

Verified

★★★★★
Attention to detail was great , very professional company