Exploring Concrete Tile Roofing Installation on a house in Plum Pennsylvania?
Roofers from The Roofing Company can describe how clay and concrete behave in cold country, and how the details are handled around chimneys and valleys
Call 412-858-8858 and we will go over the details
Not Every House Suits Tile: an Honest Start
A tile roof is a bigger undertaking than a shingle roof, mostly because of the weight, the fastening and the cold; the answers decide whether tile is a good fit.
Clay tile is baked from natural earth and keeps its color for a very long time; clay is usually the denser and more color-stable of the two.
A good conversation about Concrete Tile Roofing Installation opens with weight and framing before it gets to color; a structural opinion may be needed on an older house.
Structure Comes First: Weight Plus Winter Snow
Because clay and concrete are dense, the framing must carry the tile plus a winter of wet snow on top; the load of a heavy snow adds to the load of the tile.
A deep layer of dense Pittsburgh snow adds real load to a roof that is already heavy with tile; raise these questions at the design stage.
Weight is the first test of Concrete Tile Roofing Installation on any house, old or new; ask whether anything needs to be reinforced.
Water Inside the Clay or Concrete: the Freeze-Thaw Question
A little water soaks into any tile, and if that water freezes inside the tile it expands and can crack the surface; ask for it before you order.
Tiles that look the same can behave very differently in frost, so the quality of the product matters a great deal; skipping this step is the most common mistake.
Frost resistance is the central question for Concrete Tile Roofing Installation in cold country; do not accept a vague answer.
Water Barrier, Battens and Nails, From Deck to Ridge
Water that slips under the tile is stopped by the membrane underneath, which is why that layer matters so much; the barrier should be rated for the heat of the tile and for long service.
Tiles are hung on battens or fastened by nails, screws or clips, and the method has to hold against wind and the pull of gravity; ridgelines and hilltops take the strongest wind.
- Eaves and valleys take handwork and patience from the crew.
- The ridge pieces and closures should be named on the proposal.
Careful installation under the tile is what makes Concrete Tile Roofing Installation reliable, since the visible surface depends on everything beneath it; the underlayment is a good test of a thoughtful bid.
Profiles, Colors and the Look of the House: Seeing It in Daylight
A flat tile looks slim and tailored, while a barrel profile throws deeper shadows and a bolder line; a roof with many hips and valleys needs a shape that can be cut cleanly.
Clay holds a natural color through the years, while concrete gets its color from pigment and finishes that can fade; hold a sample against the siding on a sunny day and a gray one.
A house that suits tile gives Concrete Tile Roofing Installation a handsome result that few other coverings match; ask the roofer to show finished roofs if they can.
Choosing Among Roofing Materials: Pros, Cons and Trade-Offs
Next to shingle, tile is heavy, though some natural slate is heavier, so the house may already be built for something like it; the honest answer depends on the building.
A tile roof is a long-term choice, and a house that will stay in the family is a good candidate for it; a short stay in the house may not justify it.
A fair look at Concrete Tile Roofing Installation sets it beside slate, metal and shingle on weight, upkeep and fit; a balanced answer is a sign of a thoughtful roofer.
Keeping Tile Whole After It Is On: Care and Repair
Tile is strong under load but can crack if someone steps in the wrong place, so a tile roof should be walked on only by people who know how; a broken tile can be lifted and replaced without disturbing the others.
Tile sheds snow in slabs when conditions are right, so entrances and walkways need protection; a wide overhang takes the brunt of a slide.
A finished job of Concrete Tile Roofing Installation should come with advice on walking, cleaning and who to call for repairs; clear leaves from valleys and gutters each fall.
From Tear-Off to Ridge Cap: a Plain Account
The old roof comes off first, the deck is checked and repaired, and the crew sets up for handling heavy material; battens or fastening layouts are marked out in advance.
Each course is laid, lined up and fastened before the next, working from the bottom edge toward the ridge; caps at the ridges and hips are set last and are secured firmly.
Partial Jobs and Mixed Rooflines, Piece by Piece
Existing tile can sometimes be lifted, kept and re-laid, which is worth asking about before the old roof goes to the dump; salvaged tile can be used to repair the most visible slope.
Planning Concrete Tile Roofing Installation for a house with several roof levels means thinking about every junction, not just the large slopes; walk the property with the crew and point out each junction.
What to Ask Before You Sign: Worth Writing Down
- What did you find when you looked at my roof, and is it in the proposal?
- What happens when a tile cracks, and are spares included?
- What flashing goes around the chimney and valleys, and how will you show me?
Next Steps for Your Tile Roof, and Get Started
A tile roof is a long commitment, and the questions are worth asking before anything is ordered; honest advice may be to choose another material.
Dial 412-858-8858 and tell us what you have in mind for Concrete Tile Roofing Installation; tell us about the age and framing of the house.














