Thinking About Gutter Guards for a house near Plum Pennsylvania?
Our crew will walk you through troughs, downspouts and the ground they drain onto
Contact us at 412-858-8858 before you pick a style
Where Roof Water Is Supposed to Go: the Basic Idea
Rain that is not caught at the roof edge falls on the walls, the windows and the soil along the foundation; a line that drains slowly is a line that needs a look.
Water that spills over the edge of a gutter lands in the same spot every time, which digs a trench and soaks the foundation; a damp basement wall can be traced back to a gutter more often than people expect.
Questions about Gutter Guards are easier to answer after a look at the roof edge from the ground and from a window; pictures taken in the rain are the most useful of all.
Snow, Ice and the Hanging Trough, Season by Season
Meltwater that refreezes at the cold roof edge fills a trough with ice, and a trough full of ice weighs far more than the same trough holding water; icicles along an eave show where water is escaping.
Where attic air leaks and insulation is thin, snow melts on the warm part of the roof and refreezes over the gutter; clearing a gutter helps, but it does not cure a warm roof.
Before you decide on Gutter Guards, ask how a crew expects the gutter line to behave in January; a straight answer will mention hangers and fasteners.
What Gutters Are Made Of, and What Each Asks of the House
One-piece gutters are formed from a long roll of metal on site, so a run can be one piece with seams only at the corners and the ends; the corners are the weak points of a one-piece run.
Aluminum is light, does not rust and comes in many colors, though it can dent when a ladder leans on it or a branch falls; heavier gauge metal holds its shape better under snow.
The trough needs a slight fall toward the downspout, and a crew can check it with a level or by watching water run; ask how the crew sizes the system for your roof.
Anyone comparing options for Gutter Guards should ask about the metal, the gauge, the profile and the way the joints are made; ask what the crew does when a section is damaged later.
What Holds the Gutter Up, and What Can Go Wrong
Fascia boards that stay damp behind a leaking gutter rot from the inside, and the damage shows only when the trough pulls away; closer spacing helps in places with heavy snow.
The drip edge, the roof edge and the top of the gutter have to be lined up so that water runs into the trough and not behind it; a gutter set too high lets snow slide over it.
Anyone planning Gutter Guards should ask what will be done about the fascia, the hangers and the drip edge; the edge of the roof is sometimes in worse shape than it looks.
What Guards Do and Do Not Do, and the Options
Mature trees around Pittsburgh drop leaves, seeds and needles into gutters, and wet debris packs into a dam that holds water and weight; trimming the branches back helps a good deal.
A guard is a screen, a perforated sheet or a curved hood set over the trough to turn leaves away while water still enters; heavy snow can sit on a guard and slow the melting.
Installation matters as much as product, because a guard has to match the roof pitch, the shingle edge and the width of the trough; the crew should check the slope of the trough first.
Anyone weighing Gutter Guards should think about the trees around the house and how much debris the roof collects; tell the crew about the trees close to the house.
Hills, Slopes and the Ground Below: a Close Look
The end of a downspout matters a great deal, since water dumped beside a foundation soaks the soil and presses on the basement wall; extensions, splash blocks and buried drains move water farther away.
Rowhouses and tightly spaced homes often share walls and drain lines, so water has to be directed with extra care; a camera or a flow test can show what is below the ground.
Before you settle on Gutter Guards, walk the property and look at what each downspout drains onto; point out any basement that takes on water.
Box Gutters, Half-Rounds and Surprises: What Can Turn Up
Wood trim, carved cornices and slate or tile roofs complicate gutter work, and the crew needs to know how to handle them; repairs to the trim above are usually a separate job.
Crooked or sagging edges are common on old houses, and the crew should straighten them or work around them; get any change to the plan in writing.
Comparing proposals for Gutter Guards on an old building is easier when each one spells out its plan for surprises; ask how extra work is handled.
From Old Trough to Final Downspout, From Start to Cleanup
Before new work starts, the old troughs come down, the fascia is checked and any bad boards are replaced; weather decides when each step can happen.
Guards, if chosen, go on last, after the slope has been checked and the line has been tested; a hose test shows whether water runs to the outlets.
- Which style and metal do you suggest for this house and why, and what could change the plan?
- What happens where two roof levels meet, and what do owners usually choose?
Small Habits That Extend a Gutter Line: a Plain Routine
After a big snow or ice storm, check from the ground for bent troughs, loose hangers and downspouts that have separated; flush the downspouts with a hose to test them.
Keep a simple log of what you find, with dates and photographs, so a roofer can see how things changed; early action keeps small leaks small.
Before you decide on Gutter Guards, ask how the gutters will be looked at in future seasons; a line that is looked after tends to cause fewer problems.
Next Steps for Your Roof Edge, Whenever You Are Ready
A roof edge without working gutters sends water where it does not belong, and the choice of a new line deserves some care; a short conversation will show where to begin.
Contact us at 412-858-8858 to go over Gutter Guards for your roof edge; tell us about the age and the style of the house.














