Flat Roofing

Considering EPDM Roofing Installation on a roof that barely slopes in Plum Pennsylvania?

The crew at The Roofing Company can explain how a roof with almost no slope sheds water

Contact us at 412-858-8858 to ask what a flat roof visit covers

Water Has Nowhere Steep to Go: the Basic Idea

Water leaves a flat roof only because the surface has a slight fall, and the fall is easy to lose as a building settles and ages; the whole design is about moving water off before it can do harm.

A porch roof, a dormer top or a garage deck can be low-slope even when the main roof is steep; a roofer should look at the flat parts as carefully as the pitched ones.

Before you decide on EPDM Roofing Installation, find out how the roof drains now and what blocks it; mention every drain, scupper and downspout that you know of.

Winter Is the Real Test, and Why Seams Suffer

A low roof does not shed snow by sliding, so each storm adds to what is already up there until a thaw arrives; ice at a scupper can back water up behind the parapet.

Edges, corners and the spots around vents move the most, and they are the first places to split; hairline splits grow quickly once water is in them.

A sensible plan for EPDM Roofing Installation accounts for drains that ice over and edges that take a beating; ask how drains will be kept clear when the weather turns.

The Main Flat Roof Materials: Strengths and Limits

Rolled asphalt roofing builds up in two or more layers, with a reinforced sheet on the surface that stands up to foot traffic; seams are the part to inspect most closely.

A single-ply rubber membrane is flexible in cold weather and is usually glued or ballasted over insulation; the edges and the corners are where most problems begin.

Thermoplastic roofing is a single-ply sheet whose seams are melted together with hot air, so overlaps become one piece; cleaning the surface keeps it reflective.

Slate-look rubber products are sold for roofs with some slope, and they are laid in overlapping pieces like other tiles; ask which products suit the pitch of your roof.

Questions about EPDM Roofing Installation are better when they name the seams, the edges and the drains; samples of the material are easy to request.

The Parts You Never See, From the Deck Up

Under a flat roof surface sits a structural deck, and above the deck go insulation boards and then the finished membrane; insulation stops heat from leaking out and from melting snow unevenly.

Boards of insulation cut in a wedge shape create a slope on a roof that has none, and they are laid out so water runs toward drains; new boards can fix a chronic pond.

Any plan for EPDM Roofing Installation deserves a look at the underside of the roof where the ceiling allows; a roof can sometimes be covered and sometimes cannot.

Edges, Walls and Roof Penetrations: What to Inspect

The edges of a flat roof, where it meets walls, parapets and curbs, take more weather than the field of the roof and fail first; cracks in masonry above a flashing let water behind it.

Each opening cut through a flat roof is a place where water can enter, so each one is sealed with a boot, a collar or a curb flashing; a drain with a loose ring lets water in at the edge.

Anyone comparing proposals for EPDM Roofing Installation should look for the flashing details, not just the membrane name; point out any place you have seen a stain.

Deciding How Much to Do, and What Each Involves

Localized damage on an otherwise sound roof is usually handled with a patch, a new flashing or a resealed seam; water often travels along the deck before it shows up inside.

A full tear-off lets the crew inspect the deck and fix it, and it avoids building up weight on the structure; the condition of the insulation often settles the question.

Anyone weighing EPDM Roofing Installation should be shown the condition of the roof, with photographs where possible; compare the scope, not just the material.

A Typical Sequence: What to Expect

Before new work begins, loose gravel, debris and failed flashings are taken away and the deck is checked; soft deck boards are cut out and replaced.

Flashings at walls, curbs and pipes come after the field of the roof is laid, and then edges and drains are finished; debris is swept up and the yard is checked for nails.

  • Which membrane do you suggest for this building and why, and what could change the plan?
  • How are the walls and the parapets flashed, and why that way?

Working Safely Above Your Head, and Why They Shape the Schedule

Walking a flat roof looks easy, but wet membranes, frost and open edges make it a risky place without proper footing; a slow start on a cold morning is a sign of care.

Roofing materials and adhesives work well when the surface is dry and the air is not too cold, so the weather sets the pace of a low-roof job; a delayed day is better than a wet layer sealed in.

A plan for EPDM Roofing Installation should say how the crew gets onto the roof and how people below are kept clear; photographs of the access points help a crew plan.

Looking After a Flat Roof: Keep Water Moving

After a big storm, look from a window or a ladder for ponds, torn edges or lifted seams; do not let ice be chipped with a sharp tool.

Keep a simple log of what you find, with dates and photographs, so a roofer can see how things changed; early action keeps small leaks small.

Before you decide on EPDM Roofing Installation, ask how the roof will be looked at in future seasons; a roof that is looked after tends to leak less.

Let Us Look at Your Roof: We Can Help

Choosing how to roof a flat section is a big project, and the quality of the details sets the result; a short conversation will show where to begin.

Dial 412-858-8858 and tell us what you have in mind for EPDM Roofing Installation; bring your questions and we will go through them.

Charles Kotulsky

Verified

★★★★★
We used John and The Roofing Company to replace our roof before the summer. They showed us the Atlas shingles and we went with the hearthstone color. They removed the old roof and put the new one on all in one day which was great. We love how it looks and will be calling them for siding next year

michael Zawodni

Verified

★★★★★
Put a roof over our deck, very professional, kept jobsite clean everyday, and went above and beyond with quality and craftsmanship. Couldn't recommend this company more!! Best around.

Chris Juricich

Verified

★★★★★
The price was right, and most importantly our new roof looks beautiful. It was also delivered on-time and with great communication throughout.

Mark Lehner

Verified

★★★★★
The Roofing Company LLC is hands down the most knowledgeable and professional contractor I’ve worked with. Their team is incredibly attentive, responsive, and reliable—from the first call to the final inspection. What truly sets them apart is their deep understanding of not just roofing, but the entire construction industry. John is a true professional with years of hands-on experience and insight. His knowledge goes far beyond shingles and gutters—he understands this industry from the ground up, and it shows in every detail of the job. If you’re looking for a contractor who delivers quality, communicates clearly, and stands behind their work, look no further. The Roofing Company LLC is the real deal.

Michael Long

Verified

★★★★★
Attention to detail was great , very professional company