Thinking about Solar Roofing on a roof in McKeesport Pennsylvania?

Learn how a roof and a solar array are planned together

Phone 412-858-8858 before you commit to a layout

Start With the Roof, Not the Panels: A Sound Base

Before any Solar Roofing goes ahead, the roof should be judged for how many good years remain; a clear look at the roof saves trouble at every later step. A roofer looks for sagging, rot and weak spots in the sheathing before any hardware goes down; fasteners need solid wood to bite into, not a rotten board.

A roofer looking over a roof for solar notes the age, the layers and the condition of every slope; a short written summary of the condition keeps the owner informed. The history of the roof helps as much as the walk does; a record of past leaks speeds up the inspection and makes it more accurate.

Good solar planning is mostly good roofing planning; a thorough roof walk takes less time than a repair under an array. A conversation about timing is part of a sound plan for Solar Roofing; a worn roof under new panels is a mismatch that grows more costly with time.

Orientation, Pitch and Trees: Chimneys, Dormers and Neighbors

Solar Roofing depends on which parts of the roof see sunlight for long stretches of the day; chimneys, dormers and vent stacks cast shadows that move across the roof as the sun climbs and falls. Panels still produce power in diffuse light, though less than under a clear sky; a conversation about trimming limbs belongs in the planning stage.

Roofs that face the afternoon sun and stay clear of tall trees give a plan the most to work with; the choice of slope for panels is a judgment, not a formula.

The shape of the roof shapes the layout; valleys and ridges set limits on where rails run. Shade from the landscape belongs in the plan; the plan accounts for shade that grows over the seasons.

Low sun and short days mean a shaded roof gets very little light from late fall to early spring; a roofer visiting at several times of day sees the shade patterns clearly.

Two Ways to Put Solar on a Roof: What Each One Asks of the Roof

Most arrays are rack-mounted, with panels fastened on rails above the roofing; the look, the layout and the wiring plan all depend on the system chosen. Electrical connections under the tiles need protection from water and from pests; the roofing details at edges, valleys and penetrations still follow roofing rules.

Roofing-grade tiles and panels each have their own weight and thickness; the owner should see samples before anything is ordered.

Each style needs its own installation method and its own flashing details; the crew follows the maker's instructions for spacing, fasteners and overlaps. The roofer sets chalk lines, checks courses and keeps edges even; tile-style modules are walked on carefully and carried by hand.

Where Hardware Meets Roofing: Water Always Finds the Gap

Mounts for a rack system pass through the roofing and anchor in the framing; each piece is slipped under the shingle course above and lapped over the one below. Roofing materials and mounting hardware need to get along; careful planning keeps the roof watertight under the array.

Underlayment and ice barrier go under the mounts the same way they go under any roofing; a mount that misses the rafter holds poorly and leaks.

A solar mount is a tiny roof repair waiting to be done well or badly; every opening is tested with water and a close look before the array goes on.

Wind is a real force on a roof, and arrays have to be held down for it; the layout keeps panels back from the roof edge to reduce the pull. Water also runs behind and beneath the array; a clear path for water is part of a watertight design.

What Winter Does to an Array: Slopes, Guards and Gutters

Panels have smooth surfaces and snow can slide off them all at once; entrances and driveways should not sit directly below a slick surface. Insulation and attic ventilation still decide how snow melts across the roof; clearing debris from the gutters before winter prevents backups.

Gutters and downspouts below an array carry more melt than the same roof would deliver without panels; a roof that sheds snow safely is a roof designed for the climate.

A roof with good insulation and ventilation stays cold enough to hold snow in an even blanket; a roofer reading the attic helps the whole system work as intended.

Wires, Inverters and the Attic: Keeping Water Out of Wiring

Roofers handle the roof surface, the flashing and the mounting hardware; wiring that passes through the roof needs flashing just like a vent pipe. Questions about who is responsible for each item are better asked at the start; every trade has its own tools, its own schedule and its own habits.

The electrician and the roofer agree on where the opening goes before either one drills; a simple sketch of the route avoids surprises on the day.

A short joint walk with both trades settles most questions before work begins; a conduit along the outside wall can spare a long run through the attic.

When the Roof Needs Work Under an Array: Timing the Two Projects

A roof replaced before the array is installed gives a fresh surface under every panel; planning both projects together uses the weather windows well. Sometimes the roof needs work after the array is up; the removal and reinstallation of panels is slower than the roof repair itself.

If the roof already needs work, solving that first gives the project a solid footing; the sequence is planned with the weather in mind.

Looking after a roof gets a little more involved once panels are on it; the owner and the roofer share the job of keeping the system watertight.

Timing a reroof and a solar project can save a season; the array goes on a fresh surface and the owner gets both results in one calendar year.

Maintenance Habits for a Solar Roof: Small Habits, Long Life

Walk the yard after a big storm and look over the roofline and the edges of the array; careful records make the next owner's life easier. Leaves, twigs and dirt build up along the lower edge of a panel and trap moisture; moss grows faster on a shaded roof and spreads under the lower edge of panels.

Questions About Solar Are Welcome: Share What You See

The Roofing Company can walk the roof with you and talk through what a solar plan would involve; phone 412-858-8858 to set up a roof walk. A conversation about the roof today sets up a stronger project later; a roof that is ready for solar makes the rest of the project simpler.

Charles Kotulsky

Verified

★★★★★
We used John and The Roofing Company to replace our roof before the summer. They showed us the Atlas shingles and we went with the hearthstone color. They removed the old roof and put the new one on all in one day which was great. We love how it looks and will be calling them for siding next year

michael Zawodni

Verified

★★★★★
Put a roof over our deck, very professional, kept jobsite clean everyday, and went above and beyond with quality and craftsmanship. Couldn't recommend this company more!! Best around.

Chris Juricich

Verified

★★★★★
The price was right, and most importantly our new roof looks beautiful. It was also delivered on-time and with great communication throughout.

Mark Lehner

Verified

★★★★★
The Roofing Company LLC is hands down the most knowledgeable and professional contractor I’ve worked with. Their team is incredibly attentive, responsive, and reliable—from the first call to the final inspection. What truly sets them apart is their deep understanding of not just roofing, but the entire construction industry. John is a true professional with years of hands-on experience and insight. His knowledge goes far beyond shingles and gutters—he understands this industry from the ground up, and it shows in every detail of the job. If you’re looking for a contractor who delivers quality, communicates clearly, and stands behind their work, look no further. The Roofing Company LLC is the real deal.

Michael Long

Verified

★★★★★
Attention to detail was great , very professional company