Windows

Looking Into Windows in Jefferson Hills Pennsylvania?

The team at The Roofing Company will go over the parts of a window in plain terms

Reach us at 412-858-8858 to talk about your windows

Where the Wall Is Weakest: Light, Air and Water

Every window is a break in the water barrier of the wall, and the way the break is sealed decides how well the opening performs; a good installation matters as much as a good product.

Frames expand and shrink with the temperature, and sealant that was fine in summer can crack by February; a steady drip stain below a window is worth a close look.

Your search for Windows is a good time to take photographs of each opening, inside and out; pictures of the frames and the sills help.

What Windows Are Made Of: Strengths and Limits

Frame material changes how a window looks and ages, since vinyl is light and low-upkeep, though strong sun and deep cold affect the plastic; frame choice affects how much glass the window shows.

Most modern windows use two panes of glass with a sealed gap between them, and some add a third pane for extra insulation; laminated glass cuts sound and holds together when it breaks.

Windows also differ in the way they open, with double-hung, casement, slider and fixed styles each suited to different rooms; the style affects how much of the opening is clear glass.

A search for Windows should end with a proposal that describes each window by size, style and material; ask what the crew does when a window arrives damaged.

Replace the Whole Window or Fit an Insert, and What Each Involves

A pocket replacement slides a new window into the old frame, which saves trim and wall repair work when the frame is still sound; a crew should check the frame before suggesting an insert.

A full-frame replacement removes the entire window, frame included, and exposes the wall around the opening; flashing can be set the way it should have been originally.

Anyone weighing Windows should be shown the condition of the frames, with photographs where possible; a clear scope prevents surprises later.

From Tape Measure to Delivery: Measure Twice

The crew measures the width, the height and the squareness of each opening, and older houses are rarely square; houses settle, and openings that were square once may not be now.

When the windows arrive, the crew checks each one against the order before anyone cuts into a wall; a plan for weather helps, since openings are exposed while the work is done.

Any plan that follows your search for Windows deserves a clear schedule for the measuring visit, the delivery and the installation; schedule work for a spell of mild weather if you can.

How a Window Is Set in the Wall: Small Parts, Big Effect

Most of the real work happens around the frame, where flashing tape, a sloped sill and sealant keep water out of the wall; sealant is a backup and is not a substitute for flashing.

Gaps around a frame lose heat and let in drafts, so they are filled with low-expansion foam or insulation and then sealed inside and out; ask how the work will be checked at the end.

Before you decide on Windows, ask how the wall barrier will be tied into the new flashing; a crew that explains the flashing clearly is thinking about the right things.

What Older Walls Hide Around the Frame: What Can Turn Up

Plenty of older Pittsburgh houses have tall wood sash windows and old interior walls, and the openings are rarely square; the wall finish around an opening can crack when work begins.

Window work on an old house should leave the opening level, sound and tight before the new unit is set; ask who decides when extra repairs are needed.

Thinking about Windows on an older home means planning for what cannot be seen from outside; pick a crew that knows older houses well.

Drafts, Fog and Sound: What to Expect

New windows can make a room less drafty and a little quieter, since tight seals and extra panes slow both air and sound; leaks in the attic and walls cause drafts that a window will not fix.

People near busy roads sometimes notice a quieter house after the work, though the tightness of the frame counts as much as the glass; candor now avoids disappointment later.

Before you decide on Windows, tell the crew which rooms are cold, drafty or loud; keep expectations modest and focus on a well-sealed opening.

How a Window Job Goes: What to Expect

The crew begins by protecting floors and furniture and by removing the old window, taking care with trim, walls and glass; the sill is checked for slope.

After the opening is ready, the new window is set level and plumb, fastened, flashed and sealed, and the gaps are insulated; trim is cut and set around the frame.

  • What shape are the frames and sills in today, and what could change the plan?
  • Who cleans up the debris and the old units, and what are the trade-offs?

Keeping Frames and Glass Working: a Plain Routine

Check that each window closes and locks smoothly, and notice any that stick, rattle or let in air; trim branches that scrape the glass in wind.

A window that is checked in spring and fall and kept clean will usually outlast one that nobody looks at; small repairs done early are easier than big ones done late.

Any plan that follows your search for Windows should say how to spot a failing seal or a loose frame early; a note on cleaning and weatherstripping is a good thing to receive.

The Parts You Touch Every Day: a Brief Tour

Small parts such as handles, locks and screens do a lot of the daily work, and they wear out before the glass does; screens can be full or half and are removed for cleaning.

Window coverings, deep sills and the trim style also shape how a finished room looks, and they are easiest to plan before the work begins; a sample of the finish helps a great deal.

Take the Next Step: a Simple First Step

Windows shape how a house looks, feels and holds up in the weather, so a decision to replace them is worth some thought; we are happy to explain the options in plain terms.

Phone 412-858-8858 to ask about Windows around Jefferson Hills Pennsylvania; we will keep the talk plain and practical.

Charles Kotulsky

Verified

★★★★★
We used John and The Roofing Company to replace our roof before the summer. They showed us the Atlas shingles and we went with the hearthstone color. They removed the old roof and put the new one on all in one day which was great. We love how it looks and will be calling them for siding next year

michael Zawodni

Verified

★★★★★
Put a roof over our deck, very professional, kept jobsite clean everyday, and went above and beyond with quality and craftsmanship. Couldn't recommend this company more!! Best around.

Chris Juricich

Verified

★★★★★
The price was right, and most importantly our new roof looks beautiful. It was also delivered on-time and with great communication throughout.

Mark Lehner

Verified

★★★★★
The Roofing Company LLC is hands down the most knowledgeable and professional contractor I’ve worked with. Their team is incredibly attentive, responsive, and reliable—from the first call to the final inspection. What truly sets them apart is their deep understanding of not just roofing, but the entire construction industry. John is a true professional with years of hands-on experience and insight. His knowledge goes far beyond shingles and gutters—he understands this industry from the ground up, and it shows in every detail of the job. If you’re looking for a contractor who delivers quality, communicates clearly, and stands behind their work, look no further. The Roofing Company LLC is the real deal.

Michael Long

Verified

★★★★★
Attention to detail was great , very professional company