Researching Concrete Tile Roofing Installation for an older home in Jefferson Hills Pennsylvania?
The Roofing Company will explain what holds tile up and what keeps water out, and how tile compares with slate and shingles
Dial 412-858-8858 and tell us about the house
Not Every House Suits Tile, Then Style
Most roofs in this area are shingle, so a tile roof is a choice that calls for a few extra questions; ask next whether the tile is made for freezing weather.
Concrete tile is molded from cement, sand and pigment, and it comes in many shapes and colors; concrete is usually the heavier and the more varied in style.
A good conversation about Concrete Tile Roofing Installation opens with weight and framing before it gets to color; checking the structure protects the house as much as the roof.
Loads Overhead in a Snow Belt: Weight Plus Winter Snow
Tile is many times heavier than asphalt shingle, so the structure beneath it has to be sound and strong; a house built for slate may already be strong enough.
Winter adds to the weight of the tile, so the combined load is what the structure has to handle; a roofer should ask how much snow the roof will face.
Your plan for Concrete Tile Roofing Installation should state what was looked at and what it showed; ask whether anything needs to be reinforced.
Tile That Is Made for Winter: Picking Tile That Lasts
Moisture that gets into clay or concrete freezes and thaws all winter here, and every cycle stresses the tile; the product data sheet is worth reading.
The tile you choose should be made for repeated freezing, and the maker should say so in writing; skipping this step is the most common mistake.
When Concrete Tile Roofing Installation is planned for this climate, the first product question is how the tile handles freezing; take your time over this step.
The Hidden Layers of a Tile Roof, and Why They Count
Tiles overlap and let water run off, while the barrier underneath stops anything that blows or freezes its way in; a thin felt can break down long before the tile does.
Tiles are fastened by hand to a set schedule, and the method has to hold against wind and gravity; the fastening plan belongs in the proposal.
- Roof edges at the rake are worth asking about before work begins.
- The ridge pieces and closures should be chosen to last as long as the roof.
Any bid for Concrete Tile Roofing Installation should list what goes under the tile as clearly as it names the tile itself; the roofer's answers should be specific.
Choosing a Shape and a Shade: Seeing It in Daylight
A flat tile has a slim, tailored look, while a barrel or curved profile casts deeper shadows and a bolder line; match the profile to the style of the house.
Color should be judged in daylight against the brick, the trim and the street, not under shop lighting; hold a sample against the siding on a sunny day and a gray one.
Choosing a profile for Concrete Tile Roofing Installation is easier once you have seen the real thing on a roof you like; photographs from your phone help in the conversation.
How Tile Compares: Which Suits Your House
Slate is the classic roof of older Pittsburgh houses, and tile offers a similar weight and permanence in a wider range of styles; slate is a premium material that is hard to find an installer for.
The effort of a tile roof is front-loaded into the design, the framing and the installation, after which it can sit quietly; the extra effort pays back over decades.
You can judge Concrete Tile Roofing Installation properly only by setting it beside the other roofing choices for your house; ask what they would pick for a shaded, snowy slope.
Living With Tile, Season by Season
A cracked tile is a future leak, and walking on cold, brittle tile breaks it easily; a prompt repair keeps the underlayment dry.
Snow can slide off tile in slabs, breaking tiles below it or landing on whatever sits under the eaves; mention any doors or steps below the roof edge.
After the job, Concrete Tile Roofing Installation needs little more than debris clearing, crack checks and a watch on the flashing; call a roofer, not a handyman, for repairs.
A Typical Sequence for Tile: a Plain Account
The old roof comes off first, then the deck is checked and repaired, and the crew sets up to handle heavy material; battens or fastening layouts are marked out in advance.
The crew lays tile row by row from the bottom, cutting pieces for corners and edges and setting each one with the right fasteners; caps at the ridges and hips are set last and are secured firmly.
Partial Jobs and Mixed Rooflines, Piece by Piece
Existing tile can sometimes be lifted, kept and re-laid, which is worth asking about before the old roof goes to the dump; an exact match may not exist, so plan the blend.
Comparing proposals for Concrete Tile Roofing Installation is easier when each one covers the small roofs as well as the big ones; do not let the odd corners be treated as an afterthought.
A Short List for Tile, and What Good Answers Sound Like
- Have you looked at the rafters in the attic, and can I see it?
- Can I see a data sheet for the tile you suggest, and who makes the repair?
- Which fasteners will you use and how many per tile, and how will you show me?
Next Steps for Your Tile Roof, and Get Started
Choosing tile is a decision for the long run, so it pays to ask about structure, frost and fasteners at the start; the next step is simple.
Dial 412-858-8858 and tell us what you have in mind for Concrete Tile Roofing Installation; tell us about the age and framing of the house.














