Deciding on Asphalt Shingle Roofing for an older home in Jefferson Hills Pennsylvania?
Roofers from The Roofing Company can explain what separates a careful shingle job from a rushed one, and answer your questions in plain words
Reach us at 412-858-8858 to set up a visit
Inside a Single Asphalt Shingle: the Basics
At the core of a shingle is a woven mat that holds everything else together, and a strip of sealant on the face bonds each course to the one below. Every shingle faces sun, ice and thaw for years, and Asphalt Shingle Roofing is only as good as how well it holds up, and the details of installation matter as much as the product.
Shingle Styles in Plain Terms: What Sets Them Apart
- Traditional three-tab shingles are the lightest to carry and install.
- Laminated architectural shingles are heavier and sturdier than basic strips.
- Upper-range shingle lines are meant to echo slate or cedar shake.
- Shingles tested against hail are built to take hail better than a standard shingle.
- Algae-fighting shingle lines help keep a roof looking cleaner on shaded slopes.
Layered designs are the usual choice today because they shed wind and wear differently from flat strips, and holding a sample in your hand helps. Find out which product line Asphalt Shingle Roofing involves, because shingles of the same style can differ in how they are built, so ask how many layers the shingle has.
How to Compare Products Fairly, and What to Ignore
Color blends vary from bundle to bundle, so a roofer mixes bundles as the work goes to avoid patches of shade, and a rating is only meaningful when the shingle is installed as specified. Make sure Asphalt Shingle Roofing follows the printed installation instructions for the chosen shingle, since the ratings depend on it, and shortcuts are where problems begin.
Each Step Builds on the Last, Bottom to Top
- A swept deck with any rotted boards cut out is the first thing a careful crew prepares.
- Drip edge on the lower and side edges comes early because everything above depends on it.
- A second layer of water protection across the slopes is overlapped so water cannot run behind it.
- The first strip at the eave gives the eave a firm, sealed finish.
- Pipe boots and vent flashing is woven in with the shingles, not stuck on afterward.
- Ridge caps at the peak finish the roof and keep wind from catching the top row.
The first full course of shingles goes over the starter strip, and every course above it is offset so the joints never line up, and the courses are adjusted before they reach the ridge. The sequence in Asphalt Shingle Roofing is not arbitrary, because each layer protects the one beneath, and a missing layer is a red flag.
Placement, Depth and Count: What to Look For
A nail driven too deep cuts through the shingle, while one left too high leaves a bump that wears through, and a nail gun set at the wrong pressure causes trouble. Asphalt Shingle Roofing that skips the nailing details tends to show its weakness in the first strong wind, so ask what fasteners will be used.
Edges, Peaks and Intersections, From Valley to Peak
Cap shingles at the ridge are cut and nailed so that no fastener is left exposed to the weather, and the edges of the roof are given the same care as the middle. When you review Asphalt Shingle Roofing, look for specifics about valleys, ridge caps and flashing as well as the field shingles, and ask which parts are done by hand.
When the Temperature Matters: Timing and Technique
Cold, wind and heat all affect how shingles behave, so crews adjust their methods through the year, and an unsealed shingle can lift in the first strong wind. Ask how Asphalt Shingle Roofing is handled when the days are cold, and whether hand-sealing is part of the plan, and a warm, dry day is ideal.
Why Shingles Last Longer With a Cool Roof Deck: the Link Many Overlook
Insulation on the attic floor keeps house heat from rising to the roof, where it melts snow and feeds ice dams, and the roofer should note what ventilation the attic has. Include the attic when you think about Asphalt Shingle Roofing, since airflow affects how long shingles last, and the vent plan should be written down.
Color, Style and the Look of the Street: Making the Decision
A sample held against the siding, trim and brick shows more than a small chip does, and the finished roof will look different from a flat sample. Pay attention to color and style when planning Asphalt Shingle Roofing, since you will see the result every day, and a roofer can suggest what suits your house.
What Sloppy Shingle Work Looks Like, and What to Ask About
A roof that sheds shingles in light wind, shows exposed nails or has crooked lines was not finished with care, and the first rain or wind is a useful test. Asphalt Shingle Roofing should leave straight rows, clean flashing, tidy valleys and a swept yard, and a prompt call is better than waiting.
What Happens to the Old Shingles: Practical Expectations
Many crews put a protective cover over the roof edge and the ground below before removal begins, and ask how the crew handles nails that drop. Ask whether Asphalt Shingle Roofing includes removal of the old shingles and a full cleanup afterward, and a tidy site is a sign of a careful crew.
Questions That Reveal the Details: Before You Say Yes
- Which shingle line and style will go on the roof, and why that choice over the others?
- What is under the shingles, from the barrier to the starter course, and what happens if it rains while the deck is open?
- How is the nailing pattern checked, and can I see a sample row?
- What happens if the weather turns cold midway, and how do you check afterward?
- How are valleys, ridges and flashing finished, and can I see photos of similar work?
- Will intake and exhaust vents be checked, and how will it be confirmed?
You do not need to be an expert, because a few good questions reveal a lot about how a roofer works, and compare the notes you take with each roofer. The more precisely Asphalt Shingle Roofing is described, the easier it is to compare and the less there is to argue about later, and that record is useful years later.
Start a Shingle Conversation in Jefferson Hills Pennsylvania: No Pressure
If you are weighing shingle options for your roof, talking to a roofer is a sensible next step; call 412-858-8858 and tell us about your house, and you can decide at your own pace.














