Weighing Up Clay Tile Roofing Installation for your roof in McKeesport Pennsylvania?
Roofers from The Roofing Company will explain what holds tile up and what keeps water out, and what to check before you commit
Call 412-858-8858 and tell us about the house
Why Tile Takes More Thought: Looking Before Leaping
Tile is uncommon on Pittsburgh roofs next to asphalt shingle, and it makes bigger demands on the house; a roofer should be willing to say if it is not.
Clay tile is baked from natural earth and keeps its color for a very long time; clay is usually the denser and more color-stable of the two.
Any serious plan for Clay Tile Roofing Installation starts with a look at the structure under the roof; a clear answer on the structure is worth having before you fall for a profile.
Weight, Framing and Snow Load: the Question Under the Tiles
Many older houses were framed for something lighter, and tile adds a great deal of weight to the same rafters; reinforcing the frame is sometimes part of the job.
Winter adds to the weight of the tile, so the combined load is what the structure has to handle; a steeper slope sheds snow more readily.
The weight question is the first test of Clay Tile Roofing Installation on any house, old or new; ask whether anything needs to be reinforced.
Freeze, Thaw and Water Absorption: the Freeze-Thaw Question
Moisture that gets into clay or concrete freezes and thaws all winter here, and every cycle stresses the tile; ask for it before you order.
Dense, well-fired clay and carefully made concrete resist moisture better, and a sealed finish can add protection; tile of unknown origin is a poor risk.
When Clay Tile Roofing Installation is planned for this climate, the first product question is how the tile handles freezing; take your time over this step.
Holding Tile Down in the Wind, From Deck to Ridge
Water that gets under tile has to be stopped by the membrane below, which is why the underlayment is so important; the barrier should be rated for the heat of the tile and for long service.
Every tile is held down by something, whether a nail, a clip or a batten, and the details matter on steep or windy slopes; stainless or coated hardware avoids rust stains and failure.
- Ridges and hips take handwork and patience from the crew.
- The ridge pieces and closures should get a plain explanation.
The unseen layers carry most of the weight of Clay Tile Roofing Installation, though nobody notices them once the tile is on; ask what was chosen and why.
What Tile Looks Like on a House: From Samples to Roof
Tile comes in flat, curved and interlocking shapes, and the shape affects both appearance and water flow; match the profile to the style of the house.
Reddish clay and slate-colored concrete are common choices, and tile can also be blended for a mixed look; ask how the color is made and how it ages.
Choosing a profile for Clay Tile Roofing Installation is easier once you have seen the real thing on a roof you like; drive past houses with tile and note what appeals.
Tile or Something Lighter: a Fair Comparison
Next to shingle, tile is heavy, though some natural slate is heavier, so the house may already be built for something like it; slate is a premium material that is hard to find an installer for.
The work of a tile roof is front-loaded into the design and the installation, after which it sits quietly; compare lifetimes as well as the first outlay.
Any honest discussion of Clay Tile Roofing Installation includes the cases where another material would suit the house better; ask what they would pick if the framing were the limit.
Keeping Tile Whole After It Is On, and What to Avoid
Anyone who goes on a tile roof needs to step on the right part of the tile and know which ones are loose; do not allow gutter cleaners or antenna installers to roam the roof.
Entrances and walkways need protection from sliding snow, and snow guards for tile are worth discussing; mention any doors or steps below the roof edge.
Care for Clay Tile Roofing Installation after it is finished is simple, and a careful roofer should be willing to describe it; clear leaves from valleys and gutters each fall.
A Typical Sequence for Tile: a Plain Account
The old roof comes off first, the deck is checked and repaired, and the crew sets up for handling heavy material; tile is delivered by truck and lifted to the roof by conveyor or crane.
Tiles go on from the eave upward in courses, cut at hips and valleys and fastened to the schedule for the roof; spare tiles are set aside at the end of the job.
Where Tile Meets the Details of a House, Piece by Piece
Matching a new tile to an old one is hard, since colors and profiles change from batch to batch and from maker to maker; salvaged tile can be used to repair the most visible slope.
Any plan for Clay Tile Roofing Installation on an older home should say how the odd spots will be handled; ask whether each section needs its own underlayment.
A Short List for Tile, and What Good Answers Sound Like
- Who checks the structure before the work begins, and how do you know?
- What happens when a tile cracks, and who makes the repair?
- What goes under the tile and how long will it last, and what is the schedule?
Take the Next Step, and Get Started
Tile rewards a careful start, and the quality of the planning shows in the roof for decades; honest advice may be to choose another material.
Reach us at 412-858-8858 to start a conversation about Clay Tile Roofing Installation for your house; a first conversation is about fit, not a sale.














